Addigy F2060 HT (TPC) - 1.75mm 500g (formerly Arnitel® ID 2060-HT ) | Covestro

Addigy F2060 HT TPC Filament  Diameter: 1.75mmWeight: 500gColor: Black F2060 HT is a high performance TPC FFF material combining flexibility with prolonged high temperature use, as well as chemical resistance and strength. This combination makes it suitable to print cold charge air ducts for demanding automotive under-the-hood applications, as well as components for end-of-arm tooling. Parts printed can resist sustained high-temperature of 175°C (1000 hrs) or 190°C (500 hrs) and chemicals such as EGR condensate.  Possible applicationsAir-fuel management systems, engine shields for automotive Gaskets and seals for automotiveAluminum & rubber replacement for light weighting applications in automotive under the hoodGaskets and seals for automotiveTubes for home appliances Key Benefits & PropertiesA unique balance of flexibility, sustained high temperature and chemical resistance Prolonged high temperature performance: 175°C (1000 hrs), 190°C (500 hrs)Excellent chemical resistance against EGR condensatesHardness of Shore D 61  F2060 HT Print Settings These settings are recommended by Formfutura and are meant as a starting point to help find your optimal print settings. They should work for most 3D printers; however, you may need to experiment outside these ranges. If you find settings that work better with your printer, feel free to let us know and we will be happy to post them. Nozzle Size: ≥ 0.25mmLayer Height: > 0.1mm *First layer : 100 - 150% of first layer thickness.Flow Rate: ± 100%Print Temp: ± 220 - 245°C Print Speed:Low / Medium *First layer : 100 - 150% of first layer thickness.Retraction: NoBed Temp: ± 80 - 120°C *Do only remove printed object from print bed when print bed has cooled down to ambient temperatures, as otherwise printed part can deform severely.Fan Speed: 0%Print Surface: PEI sheetEnclosed Printer Needed: PreferredHeated Build Chamber: Preferred Experience Level: Expert