EZ Faceplate Mount Kit With 3' Spine!

PLEASE CHECK THE FACEPLATE SIZE BELOW BEFORE ORDERING... EZ Long Furby Kit to Help make your custom oddbody (or long body) creation. No glue or sewing required to attach this kit to your creation. Just add Fur, fabric, paint and stich with love. Regular comes with: - EZ Mount Faceplate (2"x2") - 3 feet of Articulated Spine (0.9 Meters x 16mm) - Fabric Mounting Spacer - Spine Mounting Block - 2 Glass Eye Chips - Screws - Assembly Instructions Longer 4' Option: - Everything in the Regular Kit - Adds 1 Foot to the spine for total spine length of 4 feet! Decorate the faceplate and attach it and the articulated spine to your creation without glue or sewing! Printed with white plastic. Faceplate is ready for painting. Faceplate measures approx. 2 inches x 2 inches. (Original Furb/Buddy size) If you are unsure if this Faceplate size will work for your creation, cut a 2"x2" square from piece of paper and use as a size reference. If you have ANY question, please feel free to send me a message. Has raised eyes to hold 14mm cabochon glass buttons so you can paint your own custom eyes. (2 included!) I recommend applying primer or a base coat of paint to the face before decorating. You can use your favorite clear glue to affix the chips to your painted faceplate. I found Loctite GO2 Gel works beautifully. If you use Super Glue, be sure to remove fingerprints from the eye chips or you may develop white smudges ruining your creation. Note: This is not a replacement part for the toy. It does not have moving parts. Printed using best resolution but there may be small imperfections or some rough surfaces that can easily be cleaned up or smoothed when painted over. Sanding is is possible but not recommended. If you use a clear primer and paint, the print lines will disappear as your creation comes to life. 100% Vegan and Cruelty Free Faceplate. Save the Furby!