Flat-Faced Forward Set Trigger Kit for Polymer Frame M&P M2.0

Nothing compares to the performance that comes from the patented Apex Forward Set Trigger Kit. This kit is engineered to provide the M&P M2.0 pistol owner with a smooth, consistent trigger pull with the advantages of shorter over-travel and shortened trigger reset. Using a combination of the Apex springs and factory sear and trigger return springs allows the user to set the trigger pull weight within a range suitable for duty/carry down to a weight desired for competition. Together, this drop-in trigger kit will: -Reduce trigger pull weight by approximately 2 lbs. -Reduce overall trigger travel by approximately 40% -Reduce trigger pre-travel, over-travel and reset distance -Smooth uptake and reset -Crisp trigger break -Center mounted pivoting safety maintains factory safety values -Direct drop-in replacement parts, no fitting required   Type 3 Trigger Differences The Type 3 Trigger for the M&P M2.0 features a visually distinct design that sets it apart while maintaining the same excellent performance as our classic trigger. Features of the Type 3 triggers include: Chamfers at the front corners (classic trigger has a radius on the front corners) This provides for a narrower trigger feel without mechanically changing the functional surfaces Additional decorative face cuts on the visible sides of the trigger Same performance as the classic line, just a different look   Drop Testing These kits have been tested “Drop Safe” according to Apex’s Drop Test Protocol in each, size and configuration of the M&P M2.0 this kit is spceified to fit into.   NOTE: Due to the nature of the anodize process, there may be a variation in the color of the trigger.